Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
There are 111 products.
Reference: 194-1346
Click L connector for one-color tape with a width of 8 or 10 mm. The size of one cube for the coupling is 13x21mm for the 8mm variant, 19x21mm for the 10mm variant. Maximum current load 5A. Not suitable for LED strips with a density of 120 LED/m.
Reference: 064-657
Z300 flexible LED strips are equipped with high-quality San'an LED chips with a lifespan of up to 50,000 hours. Thanks to their design, these tapes can be shaped. They are equipped with self-adhesive 3M tape for easy installation.
Reference: 064-670
Thanks to low consumption, small dimensions and easy installation, LED strips can be used as lighting for kitchens, in dressing rooms, on stairs, in ceilings, etc. or stylish bar lighting. We recommend installing the 24HQ6048 LED strip on a metal (aluminum profile) that serves as a heat sink.
Reference: 194-930
RGBW PCB connector L for 10 mm tape Maximum current load 5A. The corner solder joint fits all profiles.
Reference: 194-1314
Standard - EN 573-3 AW 6060 T66 755-1,2,12020-2 The price is for 1 meter
Reference: 064-887
230V, 7W / meter, 120LED / meter, LED strips waterproof 230V, high brightness
Reference: 064-663
LINE series LED strips must be installed on metal (aluminum profile), which serves as a heat sink. When purchasing a profile, it is necessary to monitor the maximum permissible power consumption of the LED strip, which can be installed on the profile. It is not recommended to cut the LINE LED strip with scissors (the diodes may be damaged), but to cut the...
Reference: 064-652
These SQ (super quality) LED strips are equipped with high-quality San'an LED chips with a lifespan of up to 50,000 hours. 12V, 4.8W / meter, 60LED / meter, LED strips indoor, brightness standard SQ.
Reference: 064-653
SB3-600 LED strips excel in extra high luminous flux at a consumption of 20W per 1m. This LED strip is equipped with high-quality SMD LED chips 2835. LED strip SB3-600 must be installed on metal (aluminum profile), which serves as a heat sink.
Reference: 064-654
The advantages of CRI-300 LED strips include higher luminous flux with lower consumption, advantageous price and construction.
Reference: 064-655
CRI-600 LED strips excel in extra high luminous flux at a consumption of 20W per 1m. The LED strip is equipped with high-quality SMD LED chips 2835. Thanks to the very high CRI (color fidelity), this strip is suitable for photographic and film purposes.
Reference: 064-656
The SQ3-W300 LED strips are equipped with high-quality San'an LED chips with a lifespan of up to 50,000 hours. The tape is encapsulated with silicone for easier maintenance (wiping with a damp cloth). LED strips must not be installed in direct sunlight. Even when the strip is switched off, it is then exposed to a high temperature, which greatly reduces...
Reference: 194-950
Standard - EN 573-3 AW 6060 T66 755-1,2,12020-2 The price is for 1 meter
Reference: 064-661
The advantages of the SB3-W300 include higher luminous flux at lower consumption, advantageous price and their construction. The SB3-W300 LED strip must be installed on (aluminum profile), which serves as a heat sink. LED strips must not be installed in direct sunlight. Even when the strip is switched off, it is then exposed to a high temperature, which...
Reference: 064-664
LED strip with divisibility by 1 diode. Thanks to the divisibility, the tape can be used even after installation, where 2.5 cm of tape modules are still long. The LED strip must be installed on a metal (aluminum profile) that serves as a heat sink.
Reference: 064-666
Thanks to low consumption, small dimensions and easy installation, LED strips can be used as lighting for kitchens, in dressing rooms, on stairs, in ceilings, etc. or stylish bar lighting. We recommend purchasing a 12IP68 terminal for the LED strip, which you will use in case of cutting. The original 5m coil is powered by cables on both sides.
Reference: 064-671
Input voltage 24V, power consumption 12W / meter, number of LEDs 60 / meter, LED strips indoor, high luminosity.
Reference: 064-672
LED strips 24V-600-20W are a novelty on our market, they excel in extra high luminous flux with a consumption of 20W per 1m. LED strip 24V-600-20W must be installed on metal (aluminum profile), which serves as a heat sink.
Reference: 064-673
LINE series LED strips must be installed on metal (aluminum profile), which serves as a heat sink. When purchasing a profile, it is necessary to monitor the maximum permitted power consumption of the LED strip, which can be installed on the profile. The small dimensions of the LED strip enable other installations such as lighting of showcases, shelves,...
Reference: 194-951
Standard - EN 573-3 AW 6060 T66 755-1,2,12020-2 The price is for 1 meter
Reference: 064-667
The series of LED strips COB is a special series of LED strips, where the LED chips are encapsulated with a layer of phosphor, which causes uniform illumination of the LED strip without the visibility of individual diodes. You can therefore use the COB LED strip, for example, in installations where it is not possible to use a sufficiently suitable profile...
Reference: 064-678
Excellent ratio of light output and color rendering (CRI> 82). Chip construction: copper base coated with silver, connection of the chip with the base with gold wire. Two-layer copper PCB (LED carrier). Self-adhesive tape 3M series 300 LSE.
