Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
There are 111 products.
Reference: 064-679
OSRAM LED chips. Excellent ratio of light output and color rendering (CRI> 85). Chip construction: copper base coated with silver, connection of the chip with the base with gold wire. Two-layer copper PCB (LED carrier). Self-adhesive tape 3M series 300 LSE.
Reference: 064-885
LED strips waterproof 230V RGB, high brightness, 10W / 1m, 60LED / meter
Reference: 192-912
LED strip RGB self-adhesive indoor, medium brightness, 30 LED/meter, the price is for 1 m
Reference: 192-913
LED strip RGB self-adhesive indoor, 14.4W/m, 12V, 60LED/meter
Reference: 192-916
LED strip RGB self-adhesive cast, medium brightness, 30 LED/meter, the price is for 1 m
Reference: 192-917
LED strip RGB self-adhesive cast, very high brightness, 60LED/meter
Reference: 192-919
LED strip RGB total waterproof, 7.2W/m, blade length 5m
Reference: 194-1242
LED strip end cap for LED strip 230V3, LED strip 230V3-120 For outdoor use, it is necessary to seal the joint between the LED strip and the terminals, for example with high-quality silicone or glue. 230V3 terminal is for LED strip 230V3 and LED strip 230V3-120
Reference: 194-1244
Power cable for monochrome LED strip 230V3, LED strip 230V3-120. Cannot be used for RGB LED strip 230V5. Cable length 2 meters. For outdoor use, the connection between the LED strip and the power cable must be sealed with high-quality silicone or glue, for example. 230V3 power cord for 230V3 LED strip and 230V3-120 LED strip
Reference: 064-453
Current amplifier for LED strips RGB, RGBW, supply voltage 5-24 V DC, maximum current for each channel 4 A.
Reference: 194-949
RGB connector click for RGB LED strips with a width of 10mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
Reference: 045-319
RGB LED strip for color lighting. 12V power supply. Suitable for use with Shelly RGBW 2 or Magic Home to control your LED lighting with Apple HomeKit with Automation and Voice Control.
Reference: 064-650
These ECONOMY LED strips are cheap and have a low consumption of 4.8W per meter. They are suitable for short-term installations up to 15,000 hours, especially as decorative lighting or lighting of drawers, cabinets, etc.
Reference: 194-935
RGBW connector click for RGBW LED strips with a width of 10 mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
Reference: 064-883
LED strip GROW for plants, 12V, 12W / meter, 60LED / meter, 650nm.
Reference: 045-321
RGB LED strip in gel for color lighting. 12V power supply. Suitable for use with Shelly RGBW 2 or Magic Home to control your LED lighting with Apple HomeKit with Automation and Voice Control.
Reference: 194-1240
L connector for LED strip 230V3, LED strip 230V3-120. For outdoor use, it is necessary to seal the joint between the LED strip and the connector, for example with high-quality silicone or glue. 230V3 connector is for 230V3 LED strip and 230V3-120 LED strip
Reference: 064-401
Brand: EVE
To create the right atmosphere with the right lighting for your home, there is a 2m Eve Light Strip. With its easy installation, you can conjure up the right light for the occasion thanks to its large number of colors and three high-quality 1800 lumens diodes. It can be controlled directly from the phone through the companion application via Apple HomeKit...
Reference: 064-402
Brand: EVE
LED strip extension 2m, luminosity 1800lm, compatible with Apple HomeKit via WiFi 2.4GHz, only for iOS devices, full color spectrum, can be extended up to 10m
