Filter By
Price
Price
CZK75.00 - CZK290.00
Color
Color
Number of LEDs
Number of LEDs
Power consumption
Power consumption
Tape width
Tape width
Tape height
Tape height
Winding
Winding
Maximum connection length
Maximum connection length
Divisibility
Divisibility
Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
There are 18 products.
Reference: 064-670
Thanks to low consumption, small dimensions and easy installation, LED strips can be used as lighting for kitchens, in dressing rooms, on stairs, in ceilings, etc. or stylish bar lighting. We recommend installing the 24HQ6048 LED strip on a metal (aluminum profile) that serves as a heat sink.
Reference: 064-673
LINE series LED strips must be installed on metal (aluminum profile), which serves as a heat sink. When purchasing a profile, it is necessary to monitor the maximum permitted power consumption of the LED strip, which can be installed on the profile. The small dimensions of the LED strip enable other installations such as lighting of showcases, shelves,...
Reference: 064-672
LED strips 24V-600-20W are a novelty on our market, they excel in extra high luminous flux with a consumption of 20W per 1m. LED strip 24V-600-20W must be installed on metal (aluminum profile), which serves as a heat sink.
Reference: 064-671
Input voltage 24V, power consumption 12W / meter, number of LEDs 60 / meter, LED strips indoor, high luminosity.
Reference: 064-678
Excellent ratio of light output and color rendering (CRI> 82). Chip construction: copper base coated with silver, connection of the chip with the base with gold wire. Two-layer copper PCB (LED carrier). Self-adhesive tape 3M series 300 LSE.
Reference: 064-675
The 24CC LED strip series are special strips that combine the properties of voltage and current strips. A power supply is integrated in each LED strip module, which guarantees the optimal operating current for the LEDs, so that with a longer length of the LED strip, there is no loss of luminosity as with conventional voltage strips. However, these are not...
Reference: 192-918
LED strip RGB self-adhesive indoor, 24W/m, 24V, 120LED/meter
Reference: 192-914
LED strip RGB 24V self-adhesive internal, 14.4W 60LED/meter
Reference: 064-679
OSRAM LED chips. Excellent ratio of light output and color rendering (CRI> 85). Chip construction: copper base coated with silver, connection of the chip with the base with gold wire. Two-layer copper PCB (LED carrier). Self-adhesive tape 3M series 300 LSE.
Reference: 193-927
RGB + DW daily (neutral) white, 24V, 14.4W, 60LED/meter
Reference: 193-925
RGB and DW cold white 4in1, 24V, 19.2W internal tape 60LED/meter
Reference: 193-923
RGB+WW warm white, 24V, 14.4W, 60LED/meter
Reference: 064-677
The 24EFI22 LED strip series is a series of LED strips with highly efficient chips that enable the achievement of an efficiency of 140 lm/W and a luminous flux of up to 3100lm per 1 meter.
Reference: 193-924
RGB and DW daily white 4in1, 24V, 19.2W internal tape 60LED/meter
