Filter By
Price
Price
CZK8.00 - CZK899.00
Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
There are 52 products.
Reference: 194-1346
Click L connector for one-color tape with a width of 8 or 10 mm. The size of one cube for the coupling is 13x21mm for the 8mm variant, 19x21mm for the 10mm variant. Maximum current load 5A. Not suitable for LED strips with a density of 120 LED/m.
Reference: 194-1314
Standard - EN 573-3 AW 6060 T66 755-1,2,12020-2 The price is for 1 meter
Reference: 194-930
RGBW PCB connector L for 10 mm tape Maximum current load 5A. The corner solder joint fits all profiles.
Reference: 194-939
Suitable for RGBW tapes. Color-coded cables make it easy to connect the tape to the controller and interconnect the tapes. 5x0.3mm^2
Reference: 194-1146
Connection with connector and cable for RGB LED strip 10 mm
Reference: 194-950
Standard - EN 573-3 AW 6060 T66 755-1,2,12020-2 The price is for 1 meter
Reference: 194-951
Standard - EN 573-3 AW 6060 T66 755-1,2,12020-2 The price is for 1 meter
Reference: 194-938
Connection with connector and cable for RGBW LED strips 10 mm. The length of the connection, including the cable, is 15-17 cm. Maximum current load 5A.
Reference: 194-936
RGBW click connector L for 10 mm tape. Maximum current load 5A.
Reference: 194-948
4pin RGB connection set with cable, suitable for connecting RGB LED strips. Maximum current load 5A. Set length: 30 cm. Cable dimensions: 4 × 0.25 mm2
Reference: 194-947
RGB PCB connector L for 10 mm tape. Maximum current load 5A. The corner solder joint fits all profiles.
Reference: 194-937
Coupling with cable for LED RGBW strip with a width of 10 mm. The size of one cube at the coupling is 14x15mm. The length of the connector, including the cable, is 17 cm. Maximum current load 5A.
Reference: 194-1140
Power socket with 2.1 x 5.5 mm terminal block. Maximum load is 5A, maximum working voltage is 50V = / ~.
Reference: 194-1244
Power cable for monochrome LED strip 230V3, LED strip 230V3-120. Cannot be used for RGB LED strip 230V5. Cable length 2 meters. For outdoor use, the connection between the LED strip and the power cable must be sealed with high-quality silicone or glue, for example. 230V3 power cord for 230V3 LED strip and 230V3-120 LED strip
Reference: 194-1242
LED strip end cap for LED strip 230V3, LED strip 230V3-120 For outdoor use, it is necessary to seal the joint between the LED strip and the terminals, for example with high-quality silicone or glue. 230V3 terminal is for LED strip 230V3 and LED strip 230V3-120
Reference: 194-949
RGB connector click for RGB LED strips with a width of 10mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
Reference: 194-946
Waterproof transparent connector with cable for RGB LED strips. The total length of the coupling is 35 cm.
Reference: 194-935
RGBW connector click for RGBW LED strips with a width of 10 mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
Reference: 194-1240
L connector for LED strip 230V3, LED strip 230V3-120. For outdoor use, it is necessary to seal the joint between the LED strip and the connector, for example with high-quality silicone or glue. 230V3 connector is for 230V3 LED strip and 230V3-120 LED strip
