Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Price
Price
CZK8.00 - CZK50,999.00
Power supply AC
Power supply AC
Napájecí napětí DC
Napájecí napětí DC
Max. load
Max. load
Channels
Channels
Working without neutral line
Working without neutral line
Power measurement
Power measurement
Dry contact
Dry contact
Apple HomeKit
Apple HomeKit
Google Assistant
Google Assistant
Amazon Alexa
Amazon Alexa
WiFi
WiFi
Bluetooth
Bluetooth
RF 433 MHz
RF 433 MHz
ZigBee
ZigBee
Z-Wave
Z-Wave
Ethernet
Ethernet
Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
There are 902 products.
Reference: 064-673
LINE series LED strips must be installed on metal (aluminum profile), which serves as a heat sink. When purchasing a profile, it is necessary to monitor the maximum permitted power consumption of the LED strip, which can be installed on the profile. The small dimensions of the LED strip enable other installations such as lighting of showcases, shelves,...
Reference: 064-672
LED strips 24V-600-20W are a novelty on our market, they excel in extra high luminous flux with a consumption of 20W per 1m. LED strip 24V-600-20W must be installed on metal (aluminum profile), which serves as a heat sink.
Reference: 064-671
Input voltage 24V, power consumption 12W / meter, number of LEDs 60 / meter, LED strips indoor, high luminosity.
Reference: 064-669
The advantages of the SB3-300 include higher luminous flux at lower consumption, advantageous price and their construction. The SB3-300 includes a 2835 chip. The 2835 chip is a single chip in a single package, which allows for better chip cooling and longer life.
Reference: 064-668
The LENS LED strip series is a special series of LED strips, which are equipped with special diodes with a light angle of 160 °. This angle of light is ideal, for example, for lighting so-called advertising lightboxes. It is an alternative to frequently used LED modules. LENS LED strips can be used as lighting for advertising purposes, but of course also...
Reference: 064-666
Thanks to low consumption, small dimensions and easy installation, LED strips can be used as lighting for kitchens, in dressing rooms, on stairs, in ceilings, etc. or stylish bar lighting. We recommend purchasing a 12IP68 terminal for the LED strip, which you will use in case of cutting. The original 5m coil is powered by cables on both sides.
Reference: 064-664
LED strip with divisibility by 1 diode. Thanks to the divisibility, the tape can be used even after installation, where 2.5 cm of tape modules are still long. The LED strip must be installed on a metal (aluminum profile) that serves as a heat sink.
Reference: 064-663
LINE series LED strips must be installed on metal (aluminum profile), which serves as a heat sink. When purchasing a profile, it is necessary to monitor the maximum permissible power consumption of the LED strip, which can be installed on the profile. It is not recommended to cut the LINE LED strip with scissors (the diodes may be damaged), but to cut the...
Reference: 064-661
The advantages of the SB3-W300 include higher luminous flux at lower consumption, advantageous price and their construction. The SB3-W300 LED strip must be installed on (aluminum profile), which serves as a heat sink. LED strips must not be installed in direct sunlight. Even when the strip is switched off, it is then exposed to a high temperature, which...
Reference: 064-658
The MINI series LED strips are special very narrow LED strips with a width of 3.5 mm. Thanks to its width, the LED strip is suitable for very narrow installation spaces. For lighting about 6 hours a day, it does not have to be placed on the radiator, however, to prolong the life, we recommend installation. The small dimensions of the LED strip enable...
Reference: 064-656
The SQ3-W300 LED strips are equipped with high-quality San'an LED chips with a lifespan of up to 50,000 hours. The tape is encapsulated with silicone for easier maintenance (wiping with a damp cloth). LED strips must not be installed in direct sunlight. Even when the strip is switched off, it is then exposed to a high temperature, which greatly reduces...
Reference: 064-655
CRI-600 LED strips excel in extra high luminous flux at a consumption of 20W per 1m. The LED strip is equipped with high-quality SMD LED chips 2835. Thanks to the very high CRI (color fidelity), this strip is suitable for photographic and film purposes.
Reference: 064-654
The advantages of CRI-300 LED strips include higher luminous flux with lower consumption, advantageous price and construction.
Reference: 064-653
SB3-600 LED strips excel in extra high luminous flux at a consumption of 20W per 1m. This LED strip is equipped with high-quality SMD LED chips 2835. LED strip SB3-600 must be installed on metal (aluminum profile), which serves as a heat sink.
Reference: 064-652
These SQ (super quality) LED strips are equipped with high-quality San'an LED chips with a lifespan of up to 50,000 hours. 12V, 4.8W / meter, 60LED / meter, LED strips indoor, brightness standard SQ.
Reference: 057-251
Brand: Shelly
Shelly Button is an accessory that allows you to make smart any table light, fan or heater. You can hide the Shelly 1 or Shelly PM switch.
Reference: 079-846
Brand: Shelly
Control and measure power consumption for wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated relay switch, with Bluetooth connection
Reference: 043-256
Brand: Sonoff
The Sonoff T1 is available in 1 to 3 channel switch versions. All switches can be controlled remotely using a telephone, and the devices connected to the switches can operate independently. Works with Amazon Alexa and Google Now, which lets you turn your device on or off with a voice command, ideal for those who need to do many chores at the same time.
Reference: 089-845
Brand: Shelly
Automatization of the lights, garage door, the irrigation system, bathroom fan, any old electrical appliances. Shelly Plus 1 has numerous applications providing enhanced smart home control. Small enough to fit behind every wall switch or wall socket, Shelly Plus 1 is retrofit and can be installed in less than 10 minutes.
Reference: 064-678
Excellent ratio of light output and color rendering (CRI> 82). Chip construction: copper base coated with silver, connection of the chip with the base with gold wire. Two-layer copper PCB (LED carrier). Self-adhesive tape 3M series 300 LSE.
Reference: 064-660
Thanks to low consumption, small dimensions and easy installation, the SQ3-W600 LED strip can be used as lighting for kitchen units, in dressing rooms, on stairs, in ceilings, etc. The LED strips are equipped with high-quality San'an LED chips with a lifespan of up to 50,000 hours. The tape is encapsulated with silicone for easier maintenance. LED strips...
Reference: 064-650
These ECONOMY LED strips are cheap and have a low consumption of 4.8W per meter. They are suitable for short-term installations up to 15,000 hours, especially as decorative lighting or lighting of drawers, cabinets, etc.
Reference: 194-948
4pin RGB connection set with cable, suitable for connecting RGB LED strips. Maximum current load 5A. Set length: 30 cm. Cable dimensions: 4 × 0.25 mm2
Reference: 194-946
Waterproof transparent connector with cable for RGB LED strips. The total length of the coupling is 35 cm.
