Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
Clutch pin for 230V3 and NEON
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Reference: 064-886
230V, 3.5W / meter, 60LED / meter, LED strips waterproof, standard brightness, the price is for 1 m
Reference: 064-887
230V, 7W / meter, 120LED / meter, LED strips waterproof 230V, high brightness
Reference: 064-887
230V, 7W / meter, 120LED / meter, LED strips waterproof 230V, high brightness
Reference: 194-941
LED remote control RGBW 1KR, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-1433
Brand: T-LED
WiFi converter for controlling all RF receivers of the dimLED series using devices with the IOS and Android operating systems. After installing the app (iOS, Android), you can control the light directly from your phone.
Reference: 194-947
RGB PCB connector L for 10 mm tape. Maximum current load 5A. The corner solder joint fits all profiles.
Reference: 194-1431
Radio frequency dimmer receiver for RGB LED products, compatible with dimLED series RGB controllers. RGB RF receiver LED dimmer 3x10A 12-36VDC for RGB dimLED controllers
Reference: 194-940
LED remote control eight-channel RGBW 8KRXL, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-935
RGBW connector click for RGBW LED strips with a width of 10 mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
Reference: 041-1429
Tuya, RF TRIAK LED dimmer 1.5A, 100-240VAC, for dimLED drivers Smart radio frequency dimmer receiver for LED products with Tuya application support. The receiver has 5 outputs and can control Single color LED lighting, CCT LED lighting, RGB lighting, RGBW lighting and RGB + CCT lighting Tuya, RF receiver LED dimmer 5x3A, 12-24VDC, for dimLED drivers
Clutch pin for 230V3 and NEON
