Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
Radio frequency dimmer receiver for RGB LED products, compatible with dimLED series RGB controllers.
RGB RF receiver LED dimmer 3x10A 12-36VDC for RGB dimLED controllers
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Radio frequency receiver dimmer for RGB LED products. The receiver can be hidden (behind a wall, plasterboard or in a cabinet), direct visibility of the receiver for the controller is not necessary.
The receiver is compatible with dimLED series RGB controllers.
To control multiple circuits, it is necessary to use one receiver for each circuit. Each receiver can be paired with up to 10 different controllers of the dimLED series and thus controlled from several places.
If the power supply is interrupted and then reconnected (for example, by interrupting the power source), this receiver has a memory of the intensity setting (the intensity of the light will return to the last set).
Input voltage: 12-36VDC
Current load: 3x10A (12V 360W, 24V 720W)
Transmission frequency: 2.4GHz
Range: up to 30m
Number of controllers: Max. 10 pcs can be paired to 1 receiver
Dimensions: 110 x 75 x 25mm
Dimming type: PWM modulation
Memory of last setting after power off: YES
Reference: 194-932
LED remote control four-channel RGBW 4KRM, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-940
LED remote control eight-channel RGBW 8KRXL, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-941
LED remote control RGBW 1KR, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-942
LED remote control four-channel RGBW 4KR, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-1433
Brand: T-LED
WiFi converter for controlling all RF receivers of the dimLED series using devices with the IOS and Android operating systems. After installing the app (iOS, Android), you can control the light directly from your phone.
Reference: 194-937
Coupling with cable for LED RGBW strip with a width of 10 mm. The size of one cube at the coupling is 14x15mm. The length of the connector, including the cable, is 17 cm. Maximum current load 5A.
Reference: 194-955
Brand: Mean Well
Power supply marked LRS-75-24, manufactured by Mean Well. It has a universal input voltage range from 100 V to 240 V. Power supply 75 W with output voltage 24 V. Output current is 3.2 A. Power supply LRS-75-24 can be used, among other things, to power LED strips. The model is also compatible with the Creality 3D printer - CR-10 Max. It has protection...
Reference: 194-942
LED remote control four-channel RGBW 4KR, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-939
Suitable for RGBW tapes. Color-coded cables make it easy to connect the tape to the controller and interconnect the tapes. 5x0.3mm^2
Reference: 194-1140
Power socket with 2.1 x 5.5 mm terminal block. Maximum load is 5A, maximum working voltage is 50V = / ~.
Reference: 194-1433
Brand: T-LED
WiFi converter for controlling all RF receivers of the dimLED series using devices with the IOS and Android operating systems. After installing the app (iOS, Android), you can control the light directly from your phone.
Reference: 194-954
Brand: Mean Well
The LRS series modular power supply features a low-profile 1U package, high efficiency and low power consumption at rest. Output voltage 24 V DC, current 1.5 A and output power 36 W DC.
Reference: 194-1437
Brand: T-LED
LED controller for controlling 230V RGB light sources
Radio frequency dimmer receiver for RGB LED products, compatible with dimLED series RGB controllers.
RGB RF receiver LED dimmer 3x10A 12-36VDC for RGB dimLED controllers
