Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
LED remote control RGBW 1KR, remote RF (radio frequency) control, for RGB and RGBW tapes
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
The dimLED OVS RGBW 1KR remote control is a wireless radio frequency control system, one controller and several receivers. With one controller it is possible to control 1 zone, which can consist of several receivers. These receivers are controlled as one section after playing with the controller.
The driver can be used for RGB tapes with an RGB receiver or for RGBW tapes with an RGBW receiver.
The receiver can be hidden (behind a wall, plasterboard or in a cabinet), no direct visibility of the receiver is required for the controller.
Dimming is stable and reliable, driver range ≤ 30M.
Dimming in the range 0-100%, 256 levels of dimming, dimming soft, no flicker. When turned on, it will light up gradually, when it turns off, it will turn out darkly.
Reference: 194-932
LED remote control four-channel RGBW 4KRM, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-933
Driver for LED strips RGBW, Bluetooth for iOS, Android, 12-24VDC
Reference: 194-940
LED remote control eight-channel RGBW 8KRXL, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-942
LED remote control four-channel RGBW 4KR, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-946
Waterproof transparent connector with cable for RGB LED strips. The total length of the coupling is 35 cm.
Reference: 194-1432
Brand: T-LED
RGBCCT RF receiver LED dimmer 5x5A 12-24VDC for RGB+CCT dimLED drivers
Reference: 194-1435
Brand: T-LED
RGB RF receiver LED dimmer 3x4A 12-24VDC for RGB dimLED controllers
Reference: 194-956
Brand: Mean Well
Power supply: switched; modular; 36W; 24VDC; 1.5A; OUT: 1; 230g
Reference: 041-1429
Tuya, RF TRIAK LED dimmer 1.5A, 100-240VAC, for dimLED drivers Smart radio frequency dimmer receiver for LED products with Tuya application support. The receiver has 5 outputs and can control Single color LED lighting, CCT LED lighting, RGB lighting, RGBW lighting and RGB + CCT lighting Tuya, RF receiver LED dimmer 5x3A, 12-24VDC, for dimLED drivers
Reference: 194-933
Driver for LED strips RGBW, Bluetooth for iOS, Android, 12-24VDC
Reference: 194-937
Coupling with cable for LED RGBW strip with a width of 10 mm. The size of one cube at the coupling is 14x15mm. The length of the connector, including the cable, is 17 cm. Maximum current load 5A.
LED remote control RGBW 1KR, remote RF (radio frequency) control, for RGB and RGBW tapes
