Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
Mounting kit to expand the possibilities of your Nanoleaf Shapes Hexagons panels even further, the possibility of bending around the corners up to an angle of 180 °, the possibility of mounting on inclined surfaces
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Enhance your living even more with Nanoleaf Shapes Hexagons Flexible Linkers for light panels. The set of 3 pieces of flexible cables will allow instead of solid original connections to connect Nanoleaf panels even in inclined places and thus create completely new lighting effects in the room. Nanoleaf Shapes Hexagons Flexible Linkers can be bent up to an angle of 180 degrees.
Reference: 069-1086
Brand: Nanoleaf
LED light - smart, luminous flux 100 lm, adjustable light temperature, (1200-6500K) control via English application, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, bridge is required to use all functions, max. Height 0.5 cm, width 20 cm, IP20
Reference: 069-1094
Brand: Nanoleaf
LED light - chitré, 42 W battery, 100 lm brightness, supportive application in English, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, with a wide range of functions including nut bridge, max. height 0.5 cm, width 20 cm, IP20
Reference: 069-1095
Brand: Nanoleaf
LED light - light green, light 100 lm, built-in full light, (1200-6500K) compatible application support in English, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, with a wide range of features height 0.5 cm, width 20 cm, IP20
Reference: 069-1100
Brand: Nanoleaf
LED light - smart, luminous flux 100 lm, adjustable light temperature, (1200-6500K) control via English application, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, bridge is required to use all functions, max. Height 0.5 cm, width 20 cm, IP20
Kód: 073-358
Značka: Philips Hue
Napájecí kabel - prodlužovací kabel, 5 m, určený pro Hue Play, možnost napojení až 3 světel na jeden napájecí zdroj, k využití všech funkcí je potřeba Philips Hue Bridge a napájecí jednotka.
Kód: 194-1140
Zásuvka napájecí se svorkovnicí 2,1 x 5,5 mm. Maximální zatížení je 5A, maximální pracovní napětí je 50V=/~.
Kód: 073-1123
Značka: Nanoleaf
Napájecí adaptér pro LED panely Nanoleaf Canvas. Délka kabelu 2,4 metrů. Výkon 25 W. Tento napájecí adaptér můžete použít pro maximálně 25 LED panelů.
Kód: 047-414
Značka: Fibaro
FIBARO Flood Sensor je bezdrátový snímač vody a teploty, který upozorní na únik vody i na změny teploty. Funguje na baterii. Na stav aktuálně zaznamenaný snímačem a změřenou teplotu se můžeš zeptat i Siri. Fibaro Flood Sensor používá technologii Apple HomeKit, která umožňuje snadno a bezpečně ovládat HomeKit doplňky pomocí Siri na iPhonu, iPadu nebo iPodu...
Kód: 073-1122
Značka: Nanoleaf
Napájecí adaptér pro LED panely Nanoleaf Shapes. Délka kabelu 2,4 metrů. Výkon 45 W.
Kód: 073-1121
Značka: Nanoleaf
Montážní kit pro montáž Nanoleaf Canvas panelů na nerovné nebo porézní povrchy, kde je nevhodná pěnová páska, k montáži jednoho světelného panelu se používá jedna montážní sada z devití, každá sada obsahuje nástroj pro odstranění Canvas panelu z montážní desky
Kód: 064-453
Zesilovač proudu pro LED pásky RGB, RGBW, napájecí napětí 5- 24 V DC, maximální proud pro jednotlivý kanál 4 A.
Kód: 081-244
Značka: Shelly
Ovládejte svůj barevný led pásek v kuchyni nebo v třeba v akváriu snadno přes mobilní aplikaci. Shelly RGBW 2 se připojuje snadno jako každý jiný LED kontrolér. Podporuje všechny bílé, RGB, RGBW LED pásky s napájením 12/ 24 V s výkonem do 288 W. Výhodou je dostupná cena a možnost ovládat skrze Apple HomeKit a hlasovou asistentku SIRI.
Mounting kit to expand the possibilities of your Nanoleaf Shapes Hexagons panels even further, the possibility of bending around the corners up to an angle of 180 °, the possibility of mounting on inclined surfaces
