Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
High quality silent fan with plain bearings, diameter 140mm, 1700 rpm, flow rate up to 123.69 m ^ 3 / h (72,8 CFM), noise level 22,8 dB.
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Arctic P14 is a 140mm fan whose development focused on concentrated airflow and high static pressure. As a result, the P14 fan can provide efficient cooling, even with increased air resistance. Therefore, it is an ideal solution for use on radiators and radiators. In addition, it is equipped with a high-quality bearing developed in Germany. Friction inside the bearing is minimized and higher efficiency is achieved. Heat generation and less noise are also reduced. These features ensure a long service life of the entire fan. Arctic P14 allows two-way installation.
Reference: 012-073
Brand: ARCTIC
PC fan 120 × 25 mm, 800 rpm - 800 rpm, 12 V, maximum noise up to 20.5 dB, 3pin.
Reference: 012-757
Brand: ARCTIC
Quality fan for use on radiators and radiators, dimensions 120 x 25 mm, speed 1800 RPM (12V), air flow 56.3 CFM, noise level 0.3 son, 3-pin connector, cable 400 mm.
Kód: 012-757
Značka: ARCTIC
Kvalitní ventilátor pro použití na chladiče a radiátory, rozměry 120 x 25 mm, rychlost 1800 RPM (12V), průtok vzduchu 56,3 CFM, úroveň hluku 0,3 son, 3-pin konektor, kabel 400 mm.
Kód: 018-131
Značka: Crypto services s.r.o.
Chlazení rigu složené z šesti ARCTIC P12 120mm ventilátorů + sada pro chlazení rigu (8ks spojek a 2ks držáků vytisknuté 3D tiskárnou k upevnění mezi ventilátory, 2 hliníkové jekly). Celkové otáčky ventilátorů 1800 RPM. Celkový průtok vzduchu 337,8 CFM. Upevnění chlazení kompatibilní pro rám s hliníkovým jeklem 20x20mm.
Kód: 037-1006
Vhodné pro připojení až čtyř 3pin nebo 4pin ventilátorů na jeden 4pin výstup na motherboardu. Délka kabelu: ~ 350 - 380 mm
Kód: 012-119
Značka: ARCTIC
Ventilátor do PC 140 × 27 mm, 200 RPM - 1700 RPM, 12 V, maximální hlučnost až 24 dB, 4pin PWM, PWM
Kód: 018-829
Značka: Crypto services s.r.o.
Montážní sada pro spojení šesti ventilátorů. Sada se skládá ze dvou hliníkových jeklů, 8ks spojek a 2ks držáků vytisknutých 3D tiskárnou. BEZ VENTILÁTORŮ! Vhodné pro ventilátory Arctic P12.
Kód: 112-133
Spínač pro 1-10 ventilátorů, vhodné pro připojení více ventilátorů k účinnějšímu chlazení.
Kód: 012-073
Značka: ARCTIC
Ventilátor do PC 120 × 25 mm, 800 ot/min - 800 ot/min, 12 V, maximální hlučnost až 20,5 dB, 3pin
Kód: 012-111
Značka: ARCTIC
Ventilátor do PC 120 × 25 mm, 200 RPM - 1800 RPM, 12 V, maximální hlučnost až 22,5 dB, 4pin PWM, PWM
High quality silent fan with plain bearings, diameter 140mm, 1700 rpm, flow rate up to 123.69 m ^ 3 / h (72,8 CFM), noise level 22,8 dB.
