Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
Shelly Bypass is suitable for Shelly 1L for resistive loads below 20 W without connected neutral conductor or Shelly Dimmer 2 for loads below 10 W without connected neutral conductor.
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
When connecting light sources with minimal load and the absence of a neutral wire to the Shelly 1L or Shelly Dimmer 2 modules, be sure to use the Shelly Bypass module. This is a load bridging module for Shelly 1L and Shelly Dimmer 2 only. It allows you to connect light sources with a load below 20 W to the Shelly 1L module and with a load below 10 W to the Shelly Dimmer 2.
Key features of the Shelly Bypass module
Power:
230 V ± 10%, 50 Hz
Dimensions:
39 × 23 × 7 mm
Reference: 071-548
Brand: Shelly
Control a wide range of halogen lights, dimmable LEDs and ferromagnetic transformers from anywhere with the world's smallest WiFi dimmer.
Reference: 081-548
Brand: Shelly
Control a wide range of halogen lights, dimmable LEDs and ferromagnetic transformers from anywhere with the world's smallest WiFi dimmer. The flashed firmware enables functionality within Apple HomeKit.
Reference: 089-555
Brand: Shelly
Shelly 1L is a miniature WiFi switch that, thanks to its size, fits under a switch in a deeper enclosure, no neutral wire required, minimum load without bypass 20 W
Reference: 079-555
Brand: Shelly
Shelly 1L is a miniature WiFi switch without neutral wire required that, thanks to its size, fits under a switch in a deeper enclosure, no neutral wire required, minimum load without bypass 20 W
Reference: 057-1535
DIN rail holder for Shelly Plus 1, Shelly Plus 1PM, Shelly Plus 2PM or Shelly Plus i4, 3D printing, PETG material
Reference: 046-266
Brand: Sonoff
Outdoor waterproof temperature sensor Sonoff DS18B20 for measuring outdoor temperature or liquid temperature. Designed for WiFi thermostat Sonoff TH16, TH10 .. Waterproof temperature probe that measures in the range -55 ° C to 125 ° C. Cable length 100cm.
Reference: 046-267
Brand: Sonoff
Sonoff Si7021 Sensor is a digital temperature and humidity sensor with a calibrated digital signal output. The sensor has very high reliability and excellent long-term stability.
Reference: 045-292
Brand: Vocolinc
The FLOWERBUD diffuser from Vocolinc is another highlight of your smart home or smaller office. Thanks to ultrasonic technology it creates a pleasant cooling mist. It has LED lighting with a color range of 16 million colors, automatic shutdown after emptying the tray, 300 ml tray, compatible with Apple HomeKit
Reference: 057-858
Brand: Shelly
Frame for Shelly WS1 wall switch or Shelly Wall Socket. White or black in color. Single, double or triple model.
Reference: 061-1051
Brand: Nuki
The charging set lasts up to 6 months until the next charge. Rechargeable battery for NUKI Smart Lock
Reference: 045-321
RGB LED strip in gel for color lighting. 12V power supply. Suitable for use with Shelly RGBW 2 or Magic Home to control your LED lighting with Apple HomeKit with Automation and Voice Control.
Reference: 041-501
The CC2531 USB dongle is a fully operational USB device which provides a PC interface to IEEE802.15.4 / ZigBee applications, comes with a CC2531ZNP-Prod firmware, the dongle can be plugged directly into your PC/Raspberry etc used as a Zigbee packet sniffer.
Shelly Bypass is suitable for Shelly 1L for resistive loads below 20 W without connected neutral conductor or Shelly Dimmer 2 for loads below 10 W without connected neutral conductor.
