Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
The Netatmo Rain / Wind Gauge Mount makes it easy to mount the anemometer and rain gauge on a wall, roof, pole or railing. Thanks to the metal sleeves, it can be attached to any pipe or rod with a round profile. If you need to attach the bracket to the wall, use the screws and dowels that are included in the package. The head can be tilted up to 90 °. With this holder you can be sure that your meteorological equipment will hold firmly in place.
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
The additional anemometer to the Netatmo weather station reliably measures wind speed and direction. Watch the weather in detail before you leave the house. This will prevent your unpreparedness for bad weather. Thanks to the mobile application, you will always be informed about changes in wind speed and direction. Netatmo Smart Anemometer offers a clear application for smartphones and tablets for free.
Netatmo Smart Anemometer has integrated 4 ultrasonic sensors for perfect determination of wind direction and speed. Through the mobile application you have the option of setting alerts for any change in wind speed and direction. Thanks to this, you have a perfect overview of the weather before you leave home. You will be prepared in advance for the current weather conditions that prevail outside. You will definitely appreciate the possibility of wireless connection between modules with a range of up to 100 meters. The application that works with all smart devices running iOS, Android and Windows phone is free. To transfer data, it is necessary to have an internet connection and a Wi-fi router.
Power: 4 × AA batteries (included)
dimensions: diameter 85 mm / height 110 mm
Reference: 059-269
Brand: NETATMO
Smart thermostat used to control the heating in the house, with placement on the boiler, WiFi, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, powered by batteries, control via the application on Android, Windows and iOS in Czech and English.
Reference: 047-276
Brand: NETATMO
Surely you want to provide the healthiest home for your family. With Smart Air Quality Sensor in Netatmo Interior you will know how to do it. Whether it is the optimum noise level for a good sleep or the right level of air humidity for an asthmatic child, the Air Quality Sensor measures everything important, draws attention to possible problems and tells...
Reference: 047-277
Brand: NETATMO
Weather station smart, with weather forecast, wireless sensor and add-on module, on the table, mains powered, measurement, indoor and outdoor temperature, humidity, CO2, noise, supported OS: Android and iOS, compatible with Apple HomeKit and Amazon Alexa, application in English.
Reference: 047-281
Brand: NETATMO
Add-on module to the weather station - rain gauge, measuring range 0.2mm / hour - 120mm / h, accuracy 1mm / h, tilting measuring cup, range up to 100m, compatibility with iOS / Android, Wi-Fi, USB, 2x AAA, central netatmo unit required.
Reference: 057-251
Brand: Shelly
Shelly Button is an accessory that allows you to make smart any table light, fan or heater. You can hide the Shelly 1 or Shelly PM switch.
Reference: 057-793
Brand: Tado°
With the tado° Stand you can place your tado° Wireless Smart Thermostat, Wireless Temperature Sensor or Smart AC Control on any surface where you can control your tado° system conveniently.
Reference: 057-563
Brand: Shelly
Shelly Bypass is suitable for Shelly 1L for resistive loads below 20 W without connected neutral conductor or Shelly Dimmer 2 for loads below 10 W without connected neutral conductor.
Reference: 057-553
DIN rail holder for Shelly 2.5, 3D print, material ABS
Reference: 057-551
DIN rail holder for 2x Shelly 1, 3D print, material ABS
Reference: 041-171
Travel adapter compatible with type G plugs, CEE7 / 7, voltage 230-250V, maximum load 3680W / 16A
Reference: 057-870
Brand: Tado°
Thanks to this device, your tado° smart thermostat can be installed wirelessly. It is therefore suitable for cases where you do not have the original thermostat or you have a wireless thermostat. The expansion set enables wireless communication between the boiler and the tado° smart thermostat. This product can only be used in combination with the tado°...
Reference: 057-550
DIN rail holder for 2x Shelly 2.5, 3D print, material ABS
The Netatmo Rain / Wind Gauge Mount makes it easy to mount the anemometer and rain gauge on a wall, roof, pole or railing. Thanks to the metal sleeves, it can be attached to any pipe or rod with a round profile. If you need to attach the bracket to the wall, use the screws and dowels that are included in the package. The head can be tilted up to 90 °. With this holder you can be sure that your meteorological equipment will hold firmly in place.
