Reference: 012-009

Riser ver009s - reduction PCIe x1 na PCIe x16

Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.

Reference: 012-113

Brand: Crypto services s.r.o.

Riser lock 21.7 mm

Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.

Reference: 079-220

Brand: Shelly

Shelly 1 for Apple HomeKit

Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.

Reference: 012-723

PCI-E 8 pin (F) to 2x PCI-E 6 + 2 pin (M)

Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male

Reference: 012-032

Brand: Crypto services s.r.o.

Aluminum frame for mining rig

Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...

Reference: 012-022

Virtual display - HDMI 1.4 Dummy Plug Display Emulator

Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.

Reference: 012-112

Brand: Crypto services s.r.o.

Riser lock 30.0 mm

Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.

Reference: 080-243

Brand: Shelly

Shelly 2.5 for Apple HomeKit

Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.

Reference: 012-031

Second source switch - Add2PSU

Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.

Reference: 012-040

Start button + 2x LED

Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.