Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
Reference: 064-678
Excellent ratio of light output and color rendering (CRI> 82). Chip construction: copper base coated with silver, connection of the chip with the base with gold wire. Two-layer copper PCB (LED carrier). Self-adhesive tape 3M series 300 LSE.
Reference: 047-758
Brand: VELUX
Starter kit of the VELUX ACTIVE with NETATMO automatic indoor control system, monitors temperature, humidity and CO2 content, automatic control of VELUX products to ensure regular ventilation and heat protection, mobile applications for Android and iOS, compatible with Apple HomeKit and Google Assistant.
Reference: 041-752
Brand: Legrand
Switch, switch for classic wire blinds (up / stop / down), must be supplemented with a starter kit, compatible with Apple HomeKit and Google Assistant, power supply: From the network, connection: ZigBee, works with Android and iOS, applications in Czech and English.
Reference: 064-675
The 24CC LED strip series are special strips that combine the properties of voltage and current strips. A power supply is integrated in each LED strip module, which guarantees the optimal operating current for the LEDs, so that with a longer length of the LED strip, there is no loss of luminosity as with conventional voltage strips. However, these are not...
Reference: 194-941
LED remote control RGBW 1KR, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 192-919
LED strip RGB total waterproof, 7.2W/m, blade length 5m
Reference: 043-719
Brand: Moeshouse
WiFi Switch for lighting and home control, connection: WiFi, mains power, compatible with Google Assistant and Amazon Alexa, applications for Android and iOS.
Reference: 043-256
Brand: Sonoff
The Sonoff T1 is available in 1 to 3 channel switch versions. All switches can be controlled remotely using a telephone, and the devices connected to the switches can operate independently. Works with Amazon Alexa and Google Now, which lets you turn your device on or off with a voice command, ideal for those who need to do many chores at the same time.
Reference: 056-300
Brand: Shelly
Shelly H&T battery Wi-Fi temperature and humidity sensor for your home automation system. Shelly H&T has built-in humidity and temperature sensors and is the first ever Wi-Fi multisensor of its kind in the world, which is battery-operated and has been operating for more than 1 year.
Reference: 079-237
Brand: Shelly
With Shelly 1PM you can measure consumption up to 16A / 3500W and read daily, weekly or monthly consumption in a graph, switch appliances according to daily schedule or control remotely from the convenience of a mobile application. There is really a lot of what a small box in a miniature design that can be easily placed in the box under a switch or socket.
Reference: 045-526
Brand: Shelly
LED bulb - 9 W, one piece in the package, GU10 socket, luminous flux 475 lm, supply voltage 230 V, emits warm light, minimum chromaticity 2700K, maximum chromaticity 6500K.
Reference: 194-942
LED remote control four-channel RGBW 4KR, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 162-44
Brand: Xiaomi
Xiaomi Aqara Hub is the smart bridge between Xiaomi Aqara products for the smart home. Devices connected to the hub that is also in HomeKit can be easily controlled via the SIRI voice assistant and automate your home with Apple HomeKit. So far, the hub has only one drawback and that is the Chinese plug. Everything can be solved by a European reduction,...
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 090-261
Brand: Sonoff
The Sonoff 4CH PRO R3 is a 4 channel WiFi switch that can also be set as a 1-16 second timer. This can be used as a pulse switch to switch the output for a specified time. It is also equipped with 433 MHz, which also allows remote control. Can be easily mounted on a DIN rail.
Reference: 080-261
Brand: Sonoff
Sonoff 4CH PRO R3 is a four channel WiFi switch supporting the Apple HomeKit ecosystem, which can be controlled not only through the application but is equipped with 433 MHz, which also allows the possibility of remote control. Can be easily mounted on a DIN rail.
Reference: 090-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling garage doors or shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. Operate automatically, manually or via the mobile app.
Reference: 071-548
Brand: Shelly
Control a wide range of halogen lights, dimmable LEDs and ferromagnetic transformers from anywhere with the world's smallest WiFi dimmer.
Reference: 091-244
Brand: Shelly
Control your colored LED strip in the kitchen or in the aquarium easily via the mobile app. RGBW2 shells are easy to connect just like any other LED controller. Supports all white, RGB, RGBW LED strips with 12 / 24V power up to 288W.
Reference: 079-237
Brand: Shelly
With Shelly 1PM you can measure consumption up to 16A / 3500W and read daily, weekly or monthly consumption in a graph, switch appliances according to daily schedule or control remotely from the convenience of a mobile application. There is really a lot of what a small box in a miniature design that can be easily placed in the box under a switch or socket.
Reference: 053-263
Brand: Sonoff
The SONOFF S55 is a handy waterproof smart socket that can connect to your home Wi-Fi network and let you manage your device remotely via phone or voice via Amazon Alexa or Google Assistant. Weatherproof material resistant to IP55, which ensures robustness and safety when used outdoors. Customize your device schedules so they can turn on / off...
Reference: 043-263
Brand: Sonoff
The SONOFF S55 is a handy waterproof smart socket that can connect to your home Wi-Fi network and allows you to manage your device remotely via phone or voice assistant via Apple HomeKit. IP55 weather resistant material for robustness and outdoor safety. Customize your device schedules so they can turn on / off automatically according to your needs,...
Reference: 079-846
Brand: Shelly
Control and measure power consumption for wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated relay switch, with Bluetooth connection
Reference: 089-555
Brand: Shelly
Shelly 1L is a miniature WiFi switch that, thanks to its size, fits under a switch in a deeper enclosure, no neutral wire required, minimum load without bypass 20 W
Reference: 194-949
RGB connector click for RGB LED strips with a width of 10mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
Reference: 194-948
4pin RGB connection set with cable, suitable for connecting RGB LED strips. Maximum current load 5A. Set length: 30 cm. Cable dimensions: 4 × 0.25 mm2
Reference: 194-947
RGB PCB connector L for 10 mm tape. Maximum current load 5A. The corner solder joint fits all profiles.
Reference: 194-946
Waterproof transparent connector with cable for RGB LED strips. The total length of the coupling is 35 cm.
Reference: 194-945
Waterproof transparent connector with cable for RGB LED strips. The total length of the coupling is 35 cm.
Reference: 194-944
Connection for LED NEON RGB. Used to connect the NEON RGB LED to the controller. The total length of the connection is 20 cm. A mandrel is also included, which is inserted into the NEON RGB LED and the connection is mounted on it. For outdoor use, it is necessary to seal the joint between the LED strip and the connector, for example with high-quality...
Reference: 194-943
RGBW RF receiver dimmer LED 4x5A 12-36VDC for RGBW dimLED drivers
Reference: 194-942
LED remote control four-channel RGBW 4KR, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-941
LED remote control RGBW 1KR, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-940
LED remote control eight-channel RGBW 8KRXL, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 194-939
Suitable for RGBW tapes. Color-coded cables make it easy to connect the tape to the controller and interconnect the tapes. 5x0.3mm^2
Reference: 194-938
Connection with connector and cable for RGBW LED strips 10 mm. The length of the connection, including the cable, is 15-17 cm. Maximum current load 5A.
