Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
There are 28 products.
Reference: 057-549
DIN rail holder for Shelly 1 and 2.5, 3D print, material ABS
Reference: 057-550
DIN rail holder for 2x Shelly 2.5, 3D print, material ABS
Reference: 057-552
DIN rail holder for Shelly 1, 3D print, material ABS
Reference: 057-551
DIN rail holder for 2x Shelly 1, 3D print, material ABS
Reference: 057-1383
DIN rail holder for Shelly RGBW2, 3D print, material PETG
Reference: 057-553
DIN rail holder for Shelly 2.5, 3D print, material ABS
Reference: 057-1536
DIN rail holder for Shelly Plus 1, Shelly Plus 1PM, Shelly Plus 2PM or Shelly Plus i4, 3D printing, PETG material
Reference: 057-1535
DIN rail holder for Shelly Plus 1, Shelly Plus 1PM, Shelly Plus 2PM or Shelly Plus i4, 3D printing, PETG material
Reference: 057-251
Brand: Shelly
Shelly Button is an accessory that allows you to make smart any table light, fan or heater. You can hide the Shelly 1 or Shelly PM switch.
Reference: 046-267
Brand: Sonoff
Sonoff Si7021 Sensor is a digital temperature and humidity sensor with a calibrated digital signal output. The sensor has very high reliability and excellent long-term stability.
Reference: 041-171
Travel adapter compatible with type G plugs, CEE7 / 7, voltage 230-250V, maximum load 3680W / 16A
Reference: 015-298
Pre-installed Home Assistant server running Raspberry Pi 4. Demo here.
Reference: 054-1239
Brand: Shelly
Terminal enabling current measurement up to 50A/120A. Voltage measurement is performed by the Shelly EM/3EM module. The terminal must be connected to the Shelly EM/3EM module for proper operation.
Reference: 045-292
Brand: Vocolinc
The FLOWERBUD diffuser from Vocolinc is another highlight of your smart home or smaller office. Thanks to ultrasonic technology it creates a pleasant cooling mist. It has LED lighting with a color range of 16 million colors, automatic shutdown after emptying the tray, 300 ml tray, compatible with Apple HomeKit
Reference: 057-314
Brand: Shelly
Charging station - exchangeable module for permanent power supply of the SHELLY-HT-USB-B sensor from a 5 V source, USB instead of a battery.
Reference: 078-529
Brand: Shelly
The professional 3-phase energy meter. Shelly 3EM can calculate 2-way consumption: produced and used energy for each of the three phases. The device can be configured to measure three separate points of a mono-phase electrical system and measure each of them separately.
Reference: 057-702
Brand: NETATMO
Netatmo Rain / Wind Gauge Mount The Netatmo Rain / Wind Gauge Mount makes it easy to mount the anemometer and rain gauge on a wall, roof, pole or railing. Thanks to the metal sleeves, it can be attached to any pipe or rod with a round profile. If you need to attach the bracket to the wall, use the screws and dowels that are included in the package. The...
Reference: 061-1051
Brand: Nuki
The charging set lasts up to 6 months until the next charge. Rechargeable battery for NUKI Smart Lock
Reference: 047-831
Brand: Fibaro
Wireless door and window sensor, compatible with Google Assistant and Amazon Alexa, connection via Z-Wave, door or window mounting, range 50 m, independently functional unit, supported OS: Android and iOS, applications in Czech, applications in Czech and in English.
Reference: 046-1183
Brand: Shelly
DS18B20 Digital One-Wire temperature sensor for Add-on module for connecting temperature sensor DS18B20 for Shelly 1/1PM - Shelly Temperature Sensor Addon for Shelly 1/1PM. The length of the temperature sensor is 1m
Reference: 046-266
Brand: Sonoff
Outdoor waterproof temperature sensor Sonoff DS18B20 for measuring outdoor temperature or liquid temperature. Designed for WiFi thermostat Sonoff TH16, TH10 .. Waterproof temperature probe that measures in the range -55 ° C to 125 ° C. Cable length 100cm.
Reference: 057-420
Brand: Sonoff
Waterproof box for Sonoff Basic, Sonoff RF, Sonoff POW and other switches that you want to keep hidden from external weather conditions, eg for switching Christmas tree lights.
Reference: 041-501
The CC2531 USB dongle is a fully operational USB device which provides a PC interface to IEEE802.15.4 / ZigBee applications, comes with a CC2531ZNP-Prod firmware, the dongle can be plugged directly into your PC/Raspberry etc used as a Zigbee packet sniffer.
Reference: 047-1093
Brand: Ondilo
A smart water analyzer in your hot tub. WIFI connection. 4 sensors for monitoring temperature, pH, disinfection capacity and conductivity. Long-lasting rechargeable batteries. Water quality information, recommendations and warnings. Real-time water analysis. Suitable for environments with Cl, Br and salt disinfection. Compact and durable design - IP68.
