Reference: 012-009

Riser ver009s - reduction PCIe x1 na PCIe x16

Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.

Reference: 012-113

Brand: Crypto services s.r.o.

Riser lock 21.7 mm

Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.

Reference: 079-220

Brand: Shelly

Shelly 1 for Apple HomeKit

Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.

Reference: 012-723

PCI-E 8 pin (F) to 2x PCI-E 6 + 2 pin (M)

Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male

Reference: 012-022

Virtual display - HDMI 1.4 Dummy Plug Display Emulator

Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.

Reference: 012-032

Brand: Crypto services s.r.o.

Aluminum frame for mining rig

Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...

Reference: 080-243

Brand: Shelly

Shelly 2.5 for Apple HomeKit

Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.

Reference: 012-112

Brand: Crypto services s.r.o.

Riser lock 30.0 mm

Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.

Reference: 012-031

Second source switch - Add2PSU

Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.

Reference: 012-040

Start button + 2x LED

Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.

Reference: 079-154

Brand: Sonoff

Sonoff Basic R2 for Apple HomeKit

Smart switch Sonoff Basic switch. It contains firmware, with which you can reliably control appliances or lights via the Homekit application by adding a switch to your home wifi network. It only works within Apple, not with Google Home Assistant.

Reference: 079-185

Brand: Sonoff

Sonoff SV 5-24V DC for Apple HomeKit

The smart switch Sonoff SV 5-24 V contains firmware, with which you can reliably control appliances, lights or garage doors through the Homekit application after adding the switch to the home wifi network. It only works within Apple, not with Google Home Assistant. The package of the garage door version includes a modified switch with wiring, a box and 1x...

Reference: 012-011

Reduction NGFF M.2 to PCIe USB 3.0 for riser

M.2 reduction - USB 3 to connect a graphics card using a riser

Reference: 081-244

Brand: Shelly

Shelly RGBW2 for Apple HomeKit

Control your colored LED strip in the kitchen or in the aquarium easily via the mobile app. RGBW2 shells are easy to connect just like any other LED controller. Supports all white, RGB, RGBW LED strips with 12 / 24V power up to 288W. The advantage is the affordable price and the ability to control through Apple HomeKit.

Reference: 079-254

Brand: Sonoff

Sonoff Mini R2 for Apple HomeKit

Sonoff Mini with support for Apple HomeKit is already as the name suggests a switch of miniature dimensions, which makes it easily squeezed under a switch or socket. Then just plug it into HomeKit and control it remotely from the comfort of your mobile device.

Reference: 053-256

Brand: Sonoff

Sonoff T1 EU touch wall switch for Apple HomeKit

The Sonoff T1 is available in 1 to 3 channel switch versions. All switches can be controlled remotely using a telephone, and devices connected to the switches can operate independently. It works with Apple HomeKit, which allows you to turn your device on or off with a voice command, ideal for those who need to do many housework at the same time.

Reference: 112-133

Switch for 10 MOLEX fans

Switch for 1-10 fans, suitable for connecting more fans for more efficient cooling.

Reference: 081-548

Brand: Shelly

Shelly Dimmer 2 for Apple HomeKit

Control a wide range of halogen lights, dimmable LEDs and ferromagnetic transformers from anywhere with the world's smallest WiFi dimmer. The flashed firmware enables functionality within Apple HomeKit.

Reference: 078-529

Brand: Shelly

Shelly 3EM

The professional 3-phase energy meter. Shelly 3EM can calculate 2-way consumption: produced and used energy for each of the three phases. The device can be configured to measure three separate points of a mono-phase electrical system and measure each of them separately.

Reference: 012-015

WatchDog - rig monitor

Watchdog - watches and monitors your PC/Rig and in case of instability or system hangs, the device restarts.

Reference: 043-261

Brand: Sonoff

Sonoff T3 EU touch wall switch for Apple HomeKit

The Sonoff T3 is available in 1 to 3 channel switch versions. All switches can be controlled remotely using a telephone, and devices connected to the switches can operate independently. It works with Apple HomeKit, which allows you to turn your device on or off with a voice command, ideal for those who need to do many housework at the same time.

Reference: 224-547

TREZOR One

Hardware wallet - support for 600 cryptocurrencies (Bitcoin, Litecoin, Ethereum…), Password manager, U2F and other functions for digital identity management, 128x64 OLED display, easy to use on Windows, OS X, Linux, USB.

Reference: 012-757

Brand: ARCTIC

Arctic Cooling Fan P12 120mm

Quality fan for use on radiators and radiators, dimensions 120 x 25 mm, speed 1800 RPM (12V), air flow 56.3 CFM, noise level 0.3 son, 3-pin connector, cable 400 mm.

Reference: 018-131

Brand: Crypto services s.r.o.

Cooling for Rig 720 mm

Rig cooling consisting of six ARCTIC P12 120mm fans at 1800 RPM. Total airflow 337.8 CFM. Cooling mounting compatible for frame with aluminum steel 20x20mm. The cooling includes 8 pcs of connectors and 2 pcs of holders printed by a 3D printer sufficient for mounting between the fans.