Filter By
Availability
Availability
Brand
Brand
Apple HomeKit
Apple HomeKit
Google Assistant
Google Assistant
Price
Price
CZK79.00 - CZK12,190.00
Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
There are 36 products.
Reference: 057-549
DIN rail holder for Shelly 1 and 2.5, 3D print, material ABS
Reference: 057-550
DIN rail holder for 2x Shelly 2.5, 3D print, material ABS
Reference: 057-552
DIN rail holder for Shelly 1, 3D print, material ABS
Reference: 057-551
DIN rail holder for 2x Shelly 1, 3D print, material ABS
Reference: 057-858
Brand: Shelly
Frame for Shelly WS1 wall switch or Shelly Wall Socket. White or black in color. Single, double or triple model.
Reference: 057-1383
DIN rail holder for Shelly RGBW2, 3D print, material PETG
Reference: 057-1535
DIN rail holder for Shelly Plus 1, Shelly Plus 1PM, Shelly Plus 2PM or Shelly Plus i4, 3D printing, PETG material
Reference: 057-553
DIN rail holder for Shelly 2.5, 3D print, material ABS
Reference: 057-1536
DIN rail holder for Shelly Plus 1, Shelly Plus 1PM, Shelly Plus 2PM or Shelly Plus i4, 3D printing, PETG material
Reference: 057-251
Brand: Shelly
Shelly Button is an accessory that allows you to make smart any table light, fan or heater. You can hide the Shelly 1 or Shelly PM switch.
Reference: 057-563
Brand: Shelly
Shelly Bypass is suitable for Shelly 1L for resistive loads below 20 W without connected neutral conductor or Shelly Dimmer 2 for loads below 10 W without connected neutral conductor.
Reference: 046-267
Brand: Sonoff
Sonoff Si7021 Sensor is a digital temperature and humidity sensor with a calibrated digital signal output. The sensor has very high reliability and excellent long-term stability.
Reference: 057-825
Brand: Shelly
Еnergy absorbing circuits are used to suppress the voltage spikes caused by the circuit's inductance when a switch, electrical or mechanical, opens. To be used for Shelly1/1PM and Shelly2.5 which are restarted when switching on induction loads such as fans, motors, rollers, or those that cause voltage spikes during switching on. RC snubber should be...
Reference: 057-524
Brand: Sonoff
Extension cable for Sonoff DS18B20 and Si7021B sensors for Sonoff TH 10/16. Length 5 m.
Reference: 045-321
RGB LED strip in gel for color lighting. 12V power supply. Suitable for use with Shelly RGBW 2 or Magic Home to control your LED lighting with Apple HomeKit with Automation and Voice Control.
Reference: 041-171
Travel adapter compatible with type G plugs, CEE7 / 7, voltage 230-250V, maximum load 3680W / 16A
Reference: 045-319
RGB LED strip for color lighting. 12V power supply. Suitable for use with Shelly RGBW 2 or Magic Home to control your LED lighting with Apple HomeKit with Automation and Voice Control.
Reference: 057-314
Brand: Shelly
Charging station - exchangeable module for permanent power supply of the SHELLY-HT-USB-B sensor from a 5 V source, USB instead of a battery.
Reference: 054-1239
Brand: Shelly
Terminal enabling current measurement up to 50A/120A. Voltage measurement is performed by the Shelly EM/3EM module. The terminal must be connected to the Shelly EM/3EM module for proper operation.
Reference: 057-870
Brand: Tado°
Thanks to this device, your tado° smart thermostat can be installed wirelessly. It is therefore suitable for cases where you do not have the original thermostat or you have a wireless thermostat. The expansion set enables wireless communication between the boiler and the tado° smart thermostat. This product can only be used in combination with the tado°...
Reference: 057-1116
Flic 2 Starter Kit for controlling devices and popular applications. Includes 4 × smart Bluetooth button, Flic Hub LR, network adapter. Compatible with more than 1000 brands, devices and services, Bluetooth 5 Low Energy & Long Range connection with a range of 50 m, easy pairing with a smartphone or Flic LR Hub. Miniature dimensions, micro suction cups...
Reference: 061-1051
Brand: Nuki
The charging set lasts up to 6 months until the next charge. Rechargeable battery for NUKI Smart Lock
Reference: 057-702
Brand: NETATMO
Netatmo Rain / Wind Gauge Mount The Netatmo Rain / Wind Gauge Mount makes it easy to mount the anemometer and rain gauge on a wall, roof, pole or railing. Thanks to the metal sleeves, it can be attached to any pipe or rod with a round profile. If you need to attach the bracket to the wall, use the screws and dowels that are included in the package. The...
