Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
LED controller for controlling 230V RGB light sources
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Programmable controller for RGB LED strips at 230V - RF (radio frequency control) allows remote control of brightness intensity, color settings, color transitions and their speed. The receiver can be hidden (behind a wall, plasterboard or in a cabinet), direct visibility of the receiver for the controller is not necessary.
Up to 100 m of RGB LED strip can be connected to 230V. This controller has a tape connector adapted to the B side of this tape.
Control description: 28 buttons, 7 preset colors, 5 presets for setting your own color with the option of setting automatic switching of these set colors, switching 3 or 7 colors, blending 3 or 7 colors, the possibility of setting the speed of effects and intensity of brightness with static color.
Setting a color preset: select a preset with a short press, set the color with the arrows of each color, hold down the preset again, the color is stored in memory.
This controller is not designed for 12V RGB LED strips
Input voltage: 90-230V AC
Output: 90-230V AC, 3 x 2.2A
Working temperature: -20°C to 60°C
Dimensions: 95mm x 67mm x 26mm
Memory of last setting after power off: YES
Reference: 194-1242
LED strip end cap for LED strip 230V3, LED strip 230V3-120 For outdoor use, it is necessary to seal the joint between the LED strip and the terminals, for example with high-quality silicone or glue. 230V3 terminal is for LED strip 230V3 and LED strip 230V3-120
Reference: 194-1146
Connection with connector and cable for RGB LED strip 10 mm
Reference: 194-949
RGB connector click for RGB LED strips with a width of 10mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
Reference: 194-1244
Power cable for monochrome LED strip 230V3, LED strip 230V3-120. Cannot be used for RGB LED strip 230V5. Cable length 2 meters. For outdoor use, the connection between the LED strip and the power cable must be sealed with high-quality silicone or glue, for example. 230V3 power cord for 230V3 LED strip and 230V3-120 LED strip
Reference: 194-1346
Click L connector for one-color tape with a width of 8 or 10 mm. The size of one cube for the coupling is 13x21mm for the 8mm variant, 19x21mm for the 10mm variant. Maximum current load 5A. Not suitable for LED strips with a density of 120 LED/m.
Reference: 194-1435
Brand: T-LED
RGB RF receiver LED dimmer 3x4A 12-24VDC for RGB dimLED controllers
Reference: 194-937
Coupling with cable for LED RGBW strip with a width of 10 mm. The size of one cube at the coupling is 14x15mm. The length of the connector, including the cable, is 17 cm. Maximum current load 5A.
Reference: 194-935
RGBW connector click for RGBW LED strips with a width of 10 mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
LED controller for controlling 230V RGB light sources
