Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
Connection for LED NEON RGB. Used to connect the NEON RGB LED to the controller. The total length of the connection is 20 cm. A mandrel is also included, which is inserted into the NEON RGB LED and the connection is mounted on it. For outdoor use, it is necessary to seal the joint between the LED strip and the connector, for example with high-quality silicone or glue.
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Reference: 194-1146
Connection with connector and cable for RGB LED strip 10 mm
Reference: 194-1141
Brand: Mean Well
Power supply: switched; modular; 108W; 24VDC; 4.5A; OUT: 1; 340g
Reference: 194-947
RGB PCB connector L for 10 mm tape. Maximum current load 5A. The corner solder joint fits all profiles.
Reference: 194-954
Brand: Mean Well
The LRS series modular power supply features a low-profile 1U package, high efficiency and low power consumption at rest. Output voltage 24 V DC, current 1.5 A and output power 36 W DC.
Reference: 041-1430
Smart radio frequency dimmer receiver for LED products with Tuya app support. DimLED Tuya PR 2K receiver has 2 outputs and can control Single color LED lighting and CCT LED lighting Tuya, RF receiver LED dimmer 2x5A, 12-36VDC, for dimLED drivers
Reference: 194-1244
Power cable for monochrome LED strip 230V3, LED strip 230V3-120. Cannot be used for RGB LED strip 230V5. Cable length 2 meters. For outdoor use, the connection between the LED strip and the power cable must be sealed with high-quality silicone or glue, for example. 230V3 power cord for 230V3 LED strip and 230V3-120 LED strip
Reference: 079-1428
Tuya, RF TRIAK LED dimmer 1.5A, 100-240VAC, for dimLED drivers
Reference: 194-1434
RGBW RF receiver LED dimmer 4x5A 12-36VDC for RGBW dimLED drivers
Connection for LED NEON RGB. Used to connect the NEON RGB LED to the controller. The total length of the connection is 20 cm. A mandrel is also included, which is inserted into the NEON RGB LED and the connection is mounted on it. For outdoor use, it is necessary to seal the joint between the LED strip and the connector, for example with high-quality silicone or glue.
