Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
LINE series LED strips must be installed on metal (aluminum profile), which serves as a heat sink. When purchasing a profile, it is necessary to monitor the maximum permissible power consumption of the LED strip, which can be installed on the profile. It is not recommended to cut the LINE LED strip with scissors (the diodes may be damaged), but to cut the individual modules. The small dimensions of the LED strip enable other installations such as lighting of showcases, shelves, goods in shops, exhibits in museums or stylish lighting of bars.
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Reference: 194-935
RGBW connector click for RGBW LED strips with a width of 10 mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
Reference: 064-883
LED strip GROW for plants, 12V, 12W / meter, 60LED / meter, 650nm.
Reference: 064-772
Brand: Nanoleaf
Intelligent light strip with a length of 2 meters. Bright functional lighting. Infinite number of colors. Control by application, controller or voice. The adaptive lighting function automatically adjusts the color temperature. Low latency with greater reliability and connection range. Plug-and-play installation without the need for a headquarters.
Reference: 064-653
SB3-600 LED strips excel in extra high luminous flux at a consumption of 20W per 1m. This LED strip is equipped with high-quality SMD LED chips 2835. LED strip SB3-600 must be installed on metal (aluminum profile), which serves as a heat sink.
Reference: 064-679
OSRAM LED chips. Excellent ratio of light output and color rendering (CRI> 85). Chip construction: copper base coated with silver, connection of the chip with the base with gold wire. Two-layer copper PCB (LED carrier). Self-adhesive tape 3M series 300 LSE.
Reference: 045-1073
Brand: Vocolinc
LS3 ColorFlux illuminates your home with countless color combinations. The LED strip can be divided into several segments and a different color can be selected for each segment. Brand new color effects for an even more colorful home and synchronization with music or sound are ideal for any occasion. Length 2x5m.
LINE series LED strips must be installed on metal (aluminum profile), which serves as a heat sink. When purchasing a profile, it is necessary to monitor the maximum permissible power consumption of the LED strip, which can be installed on the profile. It is not recommended to cut the LINE LED strip with scissors (the diodes may be damaged), but to cut the individual modules. The small dimensions of the LED strip enable other installations such as lighting of showcases, shelves, goods in shops, exhibits in museums or stylish lighting of bars.
