Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
Thanks to low consumption, small dimensions and easy installation, LED strips can be used as lighting for kitchens, in dressing rooms, on stairs, in ceilings, etc. or stylish bar lighting. We recommend installing the 24HQ6048 LED strip on a metal (aluminum profile) that serves as a heat sink.
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Reference: 064-653
SB3-600 LED strips excel in extra high luminous flux at a consumption of 20W per 1m. This LED strip is equipped with high-quality SMD LED chips 2835. LED strip SB3-600 must be installed on metal (aluminum profile), which serves as a heat sink.
Reference: 064-661
The advantages of the SB3-W300 include higher luminous flux at lower consumption, advantageous price and their construction. The SB3-W300 LED strip must be installed on (aluminum profile), which serves as a heat sink. LED strips must not be installed in direct sunlight. Even when the strip is switched off, it is then exposed to a high temperature, which...
Kód: 193-927
RGB+DW denní (neutrální) bílá, 24V, 14,4W, 60LED/metr
Kód: 079-1427
Tuya, RF spínač LED 1,5A, 100-240VAC, pro ovladače dimLED
Kód: 064-673
LED pásky řady LINE je nutné instalovat na kov (hliníkový profil), který slouží jako chladič. Při nákupu profilu je nutné hlídat i max. dovolený příkon LED pásku, které je na profil možné instalovat. Malé rozměry LED pásku umožňují další instalace jako osvětlení vitrín, polic, zboží v obchodech, exponátů v muzeích či stylové osvětlení barů.
Kód: 064-880
Značka: Sonoff
Pouze LED pásek 5050RGB - neobsahuje napájecí zdroj ani WiFi ovladač. RGB pásek je možné dělit ve vyznačených místech (cca každých 10 cm). Délka 2 nebo 5 metrů.
Kód: 064-587
Značka: Philips Hue
LED pásek prodloužení 1m, 800lm/1m, možnost prodloužení až na 10m, bluetooth, RGBW 2200-6500 až 16 miliónů barev, možnost ovládání mobilním telefonem, k využití všech funkcí nutný bridge, kompatibilní s Amazon Alexa, Google Home a Apple Homekit.
Kód: 194-1431
Radiofrekvenční přijímač stmívač pro RGB LED produkty, kompatibilní s RGB ovladači řady dimLED. RGB RF přijímač stmívač LED 3x10A 12-36VDC pro RGB ovladače dimLED
Kód: 064-675
Řada LED pásku 24CC jsou speciální pásky, které kombinují vlastnosti napěťových a proudových pásků. Na každém modulu LED pásku je integrován proudový zdroj, který zaručuje optimální pracovní proud pro LED, takže pří větší délce LED pásku nedochází k úbytkům svítivosti jako u klasických napěťových pásků. Nejedná se ovšem o klasické proudové LED pásky,...
Thanks to low consumption, small dimensions and easy installation, LED strips can be used as lighting for kitchens, in dressing rooms, on stairs, in ceilings, etc. or stylish bar lighting. We recommend installing the 24HQ6048 LED strip on a metal (aluminum profile) that serves as a heat sink.
