Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
LED strip - smart, 500 cm, dimmable, self-adhesive, with remote control, 150 LEDs, adjustable light color, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, supported by OS: iOS
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Light up your home with the ONVIS LED strip. Communicates with voice assistants. It is equipped with an IP65 degree of protection for contact with water, supports Wi-Fi standards 802.11 b / g / n in the 2.4 GHz band. It works independently. No HUB or other central unit is required for operation. The ONVIS LED strip has a microphone, thanks to which it changes colors. Certain parts of the LED strip can be turned off completely according to your needs. Of course, the brightness can be set from 0 to 100%. After connecting to your smart home, a security mode can be set, in which case the ONVIS LED strip will start to emit a light signal that resembles a police beacon. The light angle is 120 °, the lifespan of ONVIS LED strips is set at 20,000 hours. The strip contains 50 light units.
LED strip ONVIS communicates with voice assistants Apple HomeKit, Google Home and Amazon Alexa. You can easily connect it to your smart home and you can control the tape without the need for a mobile phone. You can easily set a different color for each LED. This will create unique color combinations.
Be sure to use the free Onvis Home mobile app, which is compatible with iOS 12.0 and watch OS 4.0. Several preset modes are ready in the application. One of the basic ones is Transit, where the colors flow smoothly into each other. Another Converge mode changes the color of each LED from both ends of the tape. In Divege mode, the colors go from center to edge. For Forward and Backward modes, the colors change from one end to the other. In Painting mode, you set the color for each diode and create a flashy light show. You will definitely be captivated by the Music mode, where you will create the atmosphere of a dance floor thanks to the built-in microphone in the Onvie Smart RGB LED controller. There are again several modes such as Beat, Move, Dash or Bounce, where you adjust the light response to the rhythm of the music. The flashing Twinkl system is ready for special occasions.
Reference: 064-900
Brand: ONVIS
LED strip - smart, 200 cm, dimmable, self-adhesive, with remote control, 60 LEDs, adjustable light color, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, supported by OS: iOS
Reference: 194-940
LED remote control eight-channel RGBW 8KRXL, remote RF (radio frequency) control, for RGB and RGBW tapes
Reference: 064-961
Brand: Yeelight
LED strip - smart, 100 cm, dimmable, 30 LEDs, compatible with Google Assistant and Amazon Alexa, supported OS: Android and iOS, mobile applications in English, one piece in the package. Designed for connection to LED strip Lightstrip Plus 1S (064-896).
Reference: 194-1244
Power cable for monochrome LED strip 230V3, LED strip 230V3-120. Cannot be used for RGB LED strip 230V5. Cable length 2 meters. For outdoor use, the connection between the LED strip and the power cable must be sealed with high-quality silicone or glue, for example. 230V3 power cord for 230V3 LED strip and 230V3-120 LED strip
Reference: 064-669
The advantages of the SB3-300 include higher luminous flux at lower consumption, advantageous price and their construction. The SB3-300 includes a 2835 chip. The 2835 chip is a single chip in a single package, which allows for better chip cooling and longer life.
LED strip - smart, 500 cm, dimmable, self-adhesive, with remote control, 150 LEDs, adjustable light color, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, supported by OS: iOS
