Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
For a quick, clean installation without plastering or paintwork. Compatible with the Wired Smart Thermostat or Smart Temperature Sensor.
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Reference: 059-404
Brand: Tado°
Set consisting of cable thermostat, internet interface (Bridge) and 3 AAA batteries. White color.
Reference: 059-406
Brand: Tado°
Control the air conditioning more efficiently than ever before! Save energy and maximize comfort. The package includes smart air conditioning control, power adapter with cable and accessories. White color.
Reference: 059-407
Brand: Tado°
Smart cable thermostat as an expansion element for your basic tado° set. The package includes a smart cable thermostat, AAA batteries and accessories. White color.
Reference: 057-793
Brand: Tado°
With the tado° Stand you can place your tado° Wireless Smart Thermostat, Wireless Temperature Sensor or Smart AC Control on any surface where you can control your tado° system conveniently.
Reference: 059-957
Brand: Tado°
You can place the tado° Wireless Temperature Sensor anywhere in the room and measure the room temperature where you want it, instead of directly on the radiator. This allows you to reach your desired temperature in the entire room even more precisely.
Reference: 057-825
Brand: Shelly
Еnergy absorbing circuits are used to suppress the voltage spikes caused by the circuit's inductance when a switch, electrical or mechanical, opens. To be used for Shelly1/1PM and Shelly2.5 which are restarted when switching on induction loads such as fans, motors, rollers, or those that cause voltage spikes during switching on. RC snubber should be...
Reference: 057-549
DIN rail holder for Shelly 1 and 2.5, 3D print, material ABS
Reference: 046-267
Brand: Sonoff
Sonoff Si7021 Sensor is a digital temperature and humidity sensor with a calibrated digital signal output. The sensor has very high reliability and excellent long-term stability.
Reference: 057-563
Brand: Shelly
Shelly Bypass is suitable for Shelly 1L for resistive loads below 20 W without connected neutral conductor or Shelly Dimmer 2 for loads below 10 W without connected neutral conductor.
Reference: 057-420
Brand: Sonoff
Waterproof box for Sonoff Basic, Sonoff RF, Sonoff POW and other switches that you want to keep hidden from external weather conditions, eg for switching Christmas tree lights.
Reference: 057-1383
DIN rail holder for Shelly RGBW2, 3D print, material PETG
Reference: 041-501
The CC2531 USB dongle is a fully operational USB device which provides a PC interface to IEEE802.15.4 / ZigBee applications, comes with a CC2531ZNP-Prod firmware, the dongle can be plugged directly into your PC/Raspberry etc used as a Zigbee packet sniffer.
Reference: 024-368
Brand: ASUS
Smart wireless MESH router, Wi-Fi 802.11a/b/g/n/ac support, up to 1733 Mbps, four internal antennas. Interface: 4 x RJ-45 10/100/1000 Mbps LAN, 1 x RJ-45 10/100/1000 Mbps WAN, 1 x USB 3.0
For a quick, clean installation without plastering or paintwork. Compatible with the Wired Smart Thermostat or Smart Temperature Sensor.
