Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
RGBCCT RF receiver LED dimmer 5x5A 12-24VDC for RGB+CCT dimLED drivers
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Radio frequency receiver dimmer for RGBCCT LED products. The receiver can be hidden (behind a wall, plasterboard or in a cabinet), direct visibility of the receiver for the controller is not necessary. To control multiple circuits, it is necessary to use one receiver for each circuit. Each receiver can be paired with up to 10 different controllers of the dimLED series and thus controlled from several places.
If the power is interrupted and then reconnected (for example, by interrupting the power source), this receiver has a memory of the intensity setting (the intensity of the light will return to the last set).
Input voltage: 12-24VDC
Current load: 5x5A (12V 300W, 24V 600W)
Transmission frequency: 2.4GHz
Range: Up to 30m
Number of controllers: Max. 10 pcs can be paired to 1 receiver
Dimensions: 175 x 45 x 27mm
Dimming type: PWM modulation
Memory of last setting after power off: YES
Reference: 194-1431
Radio frequency dimmer receiver for RGB LED products, compatible with dimLED series RGB controllers. RGB RF receiver LED dimmer 3x10A 12-36VDC for RGB dimLED controllers
Reference: 194-935
RGBW connector click for RGBW LED strips with a width of 10 mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
Reference: 079-1427
Tuya, RF LED switch 1.5A, 100-240VAC, for dimLED drivers
Reference: 194-949
RGB connector click for RGB LED strips with a width of 10mm. The size of one cube at the coupling is 19x21mm. Maximum current load 5A.
Reference: 194-1242
LED strip end cap for LED strip 230V3, LED strip 230V3-120 For outdoor use, it is necessary to seal the joint between the LED strip and the terminals, for example with high-quality silicone or glue. 230V3 terminal is for LED strip 230V3 and LED strip 230V3-120
Reference: 194-933
Driver for LED strips RGBW, Bluetooth for iOS, Android, 12-24VDC
Reference: 194-1346
Click L connector for one-color tape with a width of 8 or 10 mm. The size of one cube for the coupling is 13x21mm for the 8mm variant, 19x21mm for the 10mm variant. Maximum current load 5A. Not suitable for LED strips with a density of 120 LED/m.
Reference: 041-1430
Smart radio frequency dimmer receiver for LED products with Tuya app support. DimLED Tuya PR 2K receiver has 2 outputs and can control Single color LED lighting and CCT LED lighting Tuya, RF receiver LED dimmer 2x5A, 12-36VDC, for dimLED drivers
RGBCCT RF receiver LED dimmer 5x5A 12-24VDC for RGB+CCT dimLED drivers
