Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
LED light - smart, dimmable, power consumption 4 W, control via the application in English, compatible with Apple HomeKit and Amazon Alexa, to use all functions you need a bridge, material: metal and plastic, max. Height 15 cm, width 15 cm
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
The Nanoleaf Shapes power adapter is designed for LED panels of the same brand. It offers 45 W of power and has a 2.5 m cable. If you have a Nanoleaf Shapes LED panel, the power adapter is an indispensable accessory.
Cable length: 2.5m
Power: 45W
Reference: 069-1079
Brand: Nanoleaf
LED light - smart, power consumption 1.5 W, luminous flux 80 lm, adjustable light temperature, (1200-6500K) compatible with Apple HomeKit, Google Assistant and Amazon Alexa, a bridge is required to use all functions, max. Height 0.6 cm, width 20 cm, IP20
Reference: 069-1086
Brand: Nanoleaf
LED light - smart, luminous flux 100 lm, adjustable light temperature, (1200-6500K) control via English application, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, bridge is required to use all functions, max. Height 0.5 cm, width 20 cm, IP20
Reference: 069-1094
Brand: Nanoleaf
LED light - chitré, 42 W battery, 100 lm brightness, supportive application in English, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, with a wide range of functions including nut bridge, max. height 0.5 cm, width 20 cm, IP20
Reference: 069-1095
Brand: Nanoleaf
LED light - light green, light 100 lm, built-in full light, (1200-6500K) compatible application support in English, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, with a wide range of features height 0.5 cm, width 20 cm, IP20
Reference: 069-1096
Brand: Nanoleaf
LED light - smart, luminous flux 20 lm, control via English application, compatible with Apple HomeKit, Google Assistant and Amazon Alexa, bridge is required to use all functions, max. Height 0.6 cm, width 10 cm, IP20
Reference: 069-1097
Brand: Nanoleaf
LED light - smart, luminous flux 80 lm, adjustable light temperature, (1200-6500K) compatible with Apple HomeKit, Google Assistant and Amazon Alexa, a bridge is required to use all functions, max. Height 0.6 cm, width 20 cm, IP20
Reference: 064-453
Current amplifier for LED strips RGB, RGBW, supply voltage 5-24 V DC, maximum current for each channel 4 A.
Reference: 057-625
Brand: Sonoff
Swivel and tilt wall mount for Sonoff SNZB-03 Zigbee and PIR3-RF motion sensor. With its help, the motion sensor can be fixed not only to the plane of the wall, but also with the help of a rotating adapter, the motion sensor can be adjusted by turning it in the desired angle and direction.
Reference: 073-1123
Brand: Nanoleaf
Power adapter for Nanoleaf Canvas LED panels. Cable length 2.4 meters. Power 25 W. You can use this power adapter for a maximum of 25 LED panels.
Reference: 081-244
Brand: Shelly
Control your colored LED strip in the kitchen or in the aquarium easily via the mobile app. RGBW2 shells are easy to connect just like any other LED controller. Supports all white, RGB, RGBW LED strips with 12 / 24V power up to 288W. The advantage is the affordable price and the ability to control through Apple HomeKit.
Reference: 071-548
Brand: Shelly
Control a wide range of halogen lights, dimmable LEDs and ferromagnetic transformers from anywhere with the world's smallest WiFi dimmer.
Reference: 056-362
Brand: Philips Hue
Control and dim your lights with Hue dimmer. This smart switch features both a wall switch and a remote control. You can easily mount it on the wall using the adhesive tape provided, and then remove it from the magnetic base and use it as a remote control.
Reference: 044-360
Brand: Philips Hue
The brain of the entire Philips Hue smart lighting system is the Hue Bridge, which allows you to connect and control up to 50 lights and accessories. Just plug in and use the Hue app to set up regular activities, timers, custom lighting scenes and more.
Reference: 047-414
Brand: Fibaro
FIBARO Flood Sensor is a wireless water and temperature sensor that alerts water leaks and temperature changes. It works on the battery. You can also ask Siri about the status currently recorded by the sensor and the measured temperature. The Fibaro Flood Sensor uses Apple's HomeKit technology, which allows you to easily and safely control HomeKit...
LED light - smart, dimmable, power consumption 4 W, control via the application in English, compatible with Apple HomeKit and Amazon Alexa, to use all functions you need a bridge, material: metal and plastic, max. Height 15 cm, width 15 cm
