- Pack

Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
Control your colored LED strip in the kitchen or in the aquarium easily via the mobile app. RGBW2 shells are easy to connect just like any other LED controller. Supports all white, RGB, RGBW LED strips with 12 / 24V power up to 288W. The advantage is the affordable price and the ability to control through Apple HomeKit.
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Control your colored LED strip in the kitchen or in the aquarium easily via the mobile app. Shelly RGBW 2 is easy to connect just like any other LED controller. Supports all white, RGB, RGBW LED strips with 12 / 24V power and output up to 288W.
For control outside the home WiFi network, it is necessary to have a home center in the form of a HomePod, iPad or Apple TV.
Possibility of manual switch operation.
Lighting intensity control.
Control and automation via Apple HomeKit.
Voice control via SIRI.
Power up to 288 W.
Input voltage: 12-24 V DC
Output power (12 V): 144 W / 45 W / output
Output power (24 V): 288 W / 90 W / output
Output: RGB or RGBW
Max power: 3500 W
Dimensions: 43 x 38 x 14 mm (L x W x H)
Housing material: non-flammable ABS V0
Working humidity: 5% -90% RH
WiFi Standard: 802.11 bps
Encryption: WPA-PSK / WPA2-PSK
Operating temperature: 0 ºC-40 ºC (32 ° F-104 ° F)
Color: Yellow
Output: 4
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 081-548
Brand: Shelly
Control a wide range of halogen lights, dimmable LEDs and ferromagnetic transformers from anywhere with the world's smallest WiFi dimmer. The flashed firmware enables functionality within Apple HomeKit.
Reference: 079-555
Brand: Shelly
Shelly 1L is a miniature WiFi switch without neutral wire required that, thanks to its size, fits under a switch in a deeper enclosure, no neutral wire required, minimum load without bypass 20 W
Reference: 079-1427
Tuya, RF LED switch 1.5A, 100-240VAC, for dimLED drivers
Reference: 041-1429
Tuya, RF TRIAK LED dimmer 1.5A, 100-240VAC, for dimLED drivers Smart radio frequency dimmer receiver for LED products with Tuya application support. The receiver has 5 outputs and can control Single color LED lighting, CCT LED lighting, RGB lighting, RGBW lighting and RGB + CCT lighting Tuya, RF receiver LED dimmer 5x3A, 12-24VDC, for dimLED drivers
Reference: 043-719
Brand: Moeshouse
WiFi Switch for lighting and home control, connection: WiFi, mains power, compatible with Google Assistant and Amazon Alexa, applications for Android and iOS.
Reference: 081-411
Brand: Fibaro
Dimmer (250 W) for dimmable lighting. Includes 2 input contacts. Works with both LED bulbs and CFL. When combined with the Bypass 2 (FIB-FGB-002), it can control even very low power devices (from 0.5 W).
Reference: 071-548
Brand: Shelly
Control a wide range of halogen lights, dimmable LEDs and ferromagnetic transformers from anywhere with the world's smallest WiFi dimmer.
Reference: 091-244
Brand: Shelly
Control your colored LED strip in the kitchen or in the aquarium easily via the mobile app. RGBW2 shells are easy to connect just like any other LED controller. Supports all white, RGB, RGBW LED strips with 12 / 24V power up to 288W.
Reference: 079-1428
Tuya, RF TRIAK LED dimmer 1.5A, 100-240VAC, for dimLED drivers
Reference: 081-412
Brand: Fibaro
Module for color LED strips / RGBW LED strips. Power supply 12 or 24 V. Includes 4 PWM outputs (max 6 A per channel, total max 12 A) and 4 inputs - either digital contacts or analog 0–10 V.
Control your colored LED strip in the kitchen or in the aquarium easily via the mobile app. RGBW2 shells are easy to connect just like any other LED controller. Supports all white, RGB, RGBW LED strips with 12 / 24V power up to 288W. The advantage is the affordable price and the ability to control through Apple HomeKit.