Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
The SQ3-W300 LED strips are equipped with high-quality San'an LED chips with a lifespan of up to 50,000 hours. The tape is encapsulated with silicone for easier maintenance (wiping with a damp cloth). LED strips must not be installed in direct sunlight. Even when the strip is switched off, it is then exposed to a high temperature, which greatly reduces the life of the LEDs and can cause material stress, thus damaging the connections and causing the lighting of individual modules to fail.
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Reference: 064-662
CCT LED strips have the possibility to set the white color temperature. This setting can be made using a controller that is inserted between the LED strip itself and the source. Basically, 2 types of diodes in hot and cold white are inserted on the LED strip. You can use the controller to turn both colors on, off and dim independently. When you run both...
Reference: 064-664
LED strip with divisibility by 1 diode. Thanks to the divisibility, the tape can be used even after installation, where 2.5 cm of tape modules are still long. The LED strip must be installed on a metal (aluminum profile) that serves as a heat sink.
Reference: 194-1346
Click L connector for one-color tape with a width of 8 or 10 mm. The size of one cube for the coupling is 13x21mm for the 8mm variant, 19x21mm for the 10mm variant. Maximum current load 5A. Not suitable for LED strips with a density of 120 LED/m.
Reference: 192-916
LED strip RGB self-adhesive cast, medium brightness, 30 LED/meter, the price is for 1 m
Reference: 194-1432
Brand: T-LED
RGBCCT RF receiver LED dimmer 5x5A 12-24VDC for RGB+CCT dimLED drivers
Reference: 064-889
Brand: Meross
LED strip - smart, 1000 cm, dimmable, self-adhesive, adjustable light color, adjustable light temperature
Reference: 064-659
LED strip with side light, suitable for illuminating edges with forward light. Its construction is also suitable for lighting round and sharp shapes.
The SQ3-W300 LED strips are equipped with high-quality San'an LED chips with a lifespan of up to 50,000 hours. The tape is encapsulated with silicone for easier maintenance (wiping with a damp cloth). LED strips must not be installed in direct sunlight. Even when the strip is switched off, it is then exposed to a high temperature, which greatly reduces the life of the LEDs and can cause material stress, thus damaging the connections and causing the lighting of individual modules to fail.
