- Pack
![](https://www.voltio.cz/2880-large_default/sonoff-rf-for-apple-homekit.jpg)
Reference: 012-009
Reduction from PCIe x1 to PCIe x16, powered via SATA, Molex, or PCIe 6-pin, is used to connect multiple graphics cards using PCIe x1, primarily used in cryptographic mining, cable length 60 cm.
Reference: 012-113
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 21.7 mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 079-220
Brand: Shelly
Shelly 1 is a miniature WiFi switch with firmware for control within the Apple HomeKit, which, thanks to its size, can easily be installed under a switch or socket in a deeper enclosure.
Reference: 012-723
Power cable PCI-e 8 pin female to 2x PCI-e 6 + 2 pin male
Reference: 012-022
Virtual display, HDMI 1.4, DDC, EDID, support up to 4K resolution, use when accessing a remote desktop PC without a connected monitor.
Reference: 012-032
Brand: Crypto services s.r.o.
Attention !! Free shipping over $ 200 does not apply to these designs. Lightweight aluminum frame for 6 - 8 graphics cards, which has a source holder on each side and mounting holes in the middle for mounting an ATX-type motherboard. The frame is ready for modular expansion (can be stacked on top of each other), so it is space-saving, but it is also...
Reference: 080-243
Brand: Shelly
Shelly 2.5 has many uses, either as a double switch for appliances or lights, or for controlling shutters with DC or AC power. With such small dimensions it is a handy helper that easily hides in a smaller space. It can be operated manually or automatically via Apple HomeKit.
Reference: 012-112
Brand: Crypto services s.r.o.
Riser lock for PCI-E USB riser module. USB module height 30mm. Ensures firm contact between the PCI-E motherboard slot and the USB riser module.
Reference: 012-031
Second source switch. Using the SATA power supply or MOLEX connector from the first source, it turns on the second source.
Reference: 012-040
Start button with two LEDs. Easy to setup, just connect the cable into the motherboard, and you can switch on power or reset the motherboard.
Smart switch Sonoff RF switch. It contains firmware, with which you can reliably control appliances or lights via the Homekit application by adding a switch to your home wifi network. It only works within Apple, not with Google Home Assistant. In addition, the Sonoff RF switch includes a receiver for remote control with a 433 MHz remote control, which is not included and must be purchased separately.
Warranty on goods for at least 2 years
Free shipping on orders over €200 (EU)
Possibility to return undamaged goods within 14 days
Smart switch Sonoff RF. It contains firmware, with which you can reliably control appliances or lights via the Homekit application by adding a switch to your home wifi network.
It only works within Apple, not with Google Home Assistant or Amazon Alexa. The Sonoff RF switch is the same as the Sonoff Basic but has an RF receiver for remote control with a 433 MHz frequency controller.
For control outside the home WiFi network, it is necessary to have a home center in the form of a HomePod, iPad or Apple TV.
Compatible Remote Controls
Sonoff RF switch is a Sonoff version with a 433.92MHz RF receiver module inside. This wireless switch can be used together with the RF remote controller, which enables you to control appliances in indoor environment. The remote control switch allows users remote turn on/off connected appliances via app EWeLink from anywhere in the world.
SONOFF RF has been acquainted by a lot of smart home lovers. Based on it, RFR2, as a new upgrade, comes out. At this time, SONOFF redesigned RFR2 that it has enhanced performance, enhanced safety, yet on at same price.
RFR2 is a 433MHz Wi-Fi DIY smart switch with “ETL CERTIFICATION” that provides users with easy smart home control. Similarly, there are same features for them so that the upgraded RFR2 also supports users to access other smart features that the classic RFR2 supports, including APP remote control, hands-free voice control, timing schedule, smart scene, sync status, 433MHz RF control, group control and LAN control. Simply put, RFR2 has same functions and just differences in its appearance and internal performance. Let’s check the new changes for it!
The shell adopts flame-resistant LEXAN™ 940A PC resin material with UL-94 V0 class, which can pass the ball-pressure test up to 125℃ and ensures a high heat-resistance and strong structural stability. Moisture and dust resistant, no potential safety hazard in harsh weather. Engineer with the onboard antenna with over -30dBm of 2.4Gfull-band peak power that makes the signal reception sensitivity increased by 40%. The structure strictly controls the requirements of insulation, micro disconnection, and installation test to ensure the reliability and safety of RFR2. Even a heat shrinkable sleeve is used for the fuse to provide better electrical insulation.
Specification
Reference: 079-154
Brand: Sonoff
Smart switch Sonoff Basic switch. It contains firmware, with which you can reliably control appliances or lights via the Homekit application by adding a switch to your home wifi network. It only works within Apple, not with Google Home Assistant.
Reference: 056-181
Brand: Sonoff
Remote control for Sonoff RF module products. Communication on 433 MHz frequency. Easy pairing, 4 ways to control even electronic products. Baterry not included.
Reference: 056-182
Brand: Sonoff
Remote wall control for products supporting Sonoff devices with RF module. Communication on 433 MHz frequency. Simple pairing. Power: 27A 12V Battery (not included)
Reference: 079-254
Brand: Sonoff
Sonoff Mini with support for Apple HomeKit is already as the name suggests a switch of miniature dimensions, which makes it easily squeezed under a switch or socket. Then just plug it into HomeKit and control it remotely from the comfort of your mobile device.
Reference: 053-256
Brand: Sonoff
The Sonoff T1 is available in 1 to 3 channel switch versions. All switches can be controlled remotely using a telephone, and devices connected to the switches can operate independently. It works with Apple HomeKit, which allows you to turn your device on or off with a voice command, ideal for those who need to do many housework at the same time.
Reference: 080-261
Brand: Sonoff
Sonoff 4CH PRO R3 is a four channel WiFi switch supporting the Apple HomeKit ecosystem, which can be controlled not only through the application but is equipped with 433 MHz, which also allows the possibility of remote control. Can be easily mounted on a DIN rail.
Reference: 089-845
Brand: Shelly
Automatization of the lights, garage door, the irrigation system, bathroom fan, any old electrical appliances. Shelly Plus 1 has numerous applications providing enhanced smart home control. Small enough to fit behind every wall switch or wall socket, Shelly Plus 1 is retrofit and can be installed in less than 10 minutes.
Reference: 059-266
Brand: Sonoff
Smart Switch WiFi switch with temperature and humidity measurement, for remote control of electrical appliances, Amazon Web Services cloud, eWeLink application, voice control via Amazon Echo and Google Assistant, sensor not included.
Reference: 041-504
Brand: Sonoff
Simple switch for USB devices. Control your USB devices such as a lamp, LED strip or fan cleverly with Sonoff Micro. Simple control using a voice assistant or an application on a mobile phone, the possibility of switching according to a time schedule. It is also suitable for gently charging a mobile phone when it turns off the power when your device is...
Reference: 069-458
Brand: Sonoff
Sonoff TH10 is a switch that can monitor and adjust the temperature via Apple HomeKit. The Sonoff TH supports output switching of up to 10 A.Supports a preset temperature range when the ambient temperature drops or rises to the set range, automatically turns on or off the connected device. TH10 for Apple HomeKit is only compatible with Si7021 and DS18B20...
Reference: 082-1537
Brand: Shelly
Next-generation DIN-mountable 3-Phase Energy Meter Shelly Pro 3EM is a DIN rail mountable three-phase energy meter. Enhanced with all the gen2 firmware flexibility and LAN connectivity, it provides professional integrators with additional options for end-customer solutions. Shelly Pro 3EM reports accumulated energy as well as instantaneous voltage,...
Reference: 079-185
Brand: Sonoff
The smart switch Sonoff SV 5-24 V contains firmware, with which you can reliably control appliances, lights or garage doors through the Homekit application after adding the switch to the home wifi network. It only works within Apple, not with Google Home Assistant. The package of the garage door version includes a modified switch with wiring, a box and 1x...
Reference: 089-254
Brand: Sonoff
As the name suggests, the Sonoff Mini is a miniature switch that makes it easy to press it under a switch or socket. Then just plug it into a smart home app and control it remotely from the comfort of your mobile device.
Reference: 059-1347
Brand: Sonoff
Wifi thermostat, successor of Sonoff TH10/16. Support for sensors with RJ11 connectors (THS01, DS18B20 with RJ11). Support for sensors Si7021, AM2301, DS18B20, MS01. Temperature and humidity record 6 months back. Option to export temperatures and humidity to .xlsx format. Installation on a DIN rail. Maximum load of variant 16A
Smart switch Sonoff RF switch. It contains firmware, with which you can reliably control appliances or lights via the Homekit application by adding a switch to your home wifi network. It only works within Apple, not with Google Home Assistant. In addition, the Sonoff RF switch includes a receiver for remote control with a 433 MHz remote control, which is not included and must be purchased separately.